Home / Resources
Catalogue, specification sheets, MSDS and sample certificates — sent by email, no gated forms.
Ask once and you get the set, including MSDS for the grades you are evaluating
Glossary
| Parameter | What it measures | Typical range | When it matters |
|---|---|---|---|
| Iodine value | Micropore surface area below 2 nm, by iodine adsorption | 600–1,100 mg/g | Small molecules: chlorine, taste & odour, gold |
| CTC activity | Carbon tetrachloride uptake — gas-phase micropore capacity | 40–65% | VOC and solvent recovery duty |
| Molasses number | Decolourisation of a standard molasses solution — mesopore proxy | 100–300 | Sugar, oil and liquor decolourisation |
| Methylene blue | Mesopore uptake of a dye molecule | 120–220 mg/g | Colour removal, PAC selection |
| Hardness | Resistance to abrasion, ball-pan method | 90–98% | Backwashed beds, CIP / CIL circuits |
| Ash content | Inorganic residue after ignition | 2–12% | Potable water, pharma, low-leachable duty |
| Bulk density | Mass per unit volume, as packed | 450–550 g/L | Vessel fill weight and media volume |
| EBCT | Empty bed contact time — media volume ÷ flow rate | 10–30 min | The single most important sizing number |
Frequently asked questions
Contaminant, inlet level, flow rate, target limit — four numbers are enough for a first recommendation and a media volume estimate.